PCB REPAIR, REWORK & COMPONENT REPLACEMENT
Printed Circuit Board Repair Services
We diagnose and repair printed circuit boards from industrial equipment, commercial systems, household appliances, and other electronic devices. We also handle production rework, component replacement, and pad and trace repair. Schematics are helpful, but not always required.
Not sure whether we can help with your board? Send photos and a brief description before shipping.
Our PCB Repair Expertise
BOARD-LEVEL REPAIR SERVICES
Choose the Right PCB Repair Service
PCB Reborn evaluates repair and rework options for several board categories. The best starting point is the board type, part number, failure symptom, visible condition, and the test or operating context available after repair.
Industrial Control Boards
Control, interface, power, drive, production, and legacy boards requiring a defined board-level scope.
Industrial PCB repair →
Medical Equipment Boards
Board-level assessment for boards from clinical and laboratory equipment, with complete device validation kept separate.
Medical PCB repair →
Laptop Motherboards
No-power, charging, connector, corrosion, pad, trace, and component-level assessment where practical.
Laptop motherboard repair →
Appliance Control Boards
Evaluation of appliance control boards where repair, replacement, and board compatibility need to be compared.
Appliance control board repair →Illustrative board images; actual boards are assessed individually.
OUR PROCESS
4-Step PCB Repair Process
From your first message to the return of your board, here is what to expect.
Send Photos & Details
Tell us about the board, the fault or rework task, and the result you need. We review the information and confirm the next step before you ship.
Diagnosis & Quote
After receiving the board, we assess the work needed and provide a quote. We confirm the scope and cost with you before repair.
Repair & Test
We carry out the agreed repair or rework and test what can be checked with the available equipment and setup.
Report & Return
We explain the work completed, test results, and any remaining limitations, then arrange return shipping.
BOARD-LEVEL DIAGNOSTICS
How We Diagnose PCB Faults
We combine visual inspection, electrical measurements, and component checks to investigate PCB faults. The test setup depends on the board and the information available.
- Oscilloscopes for checking signals and circuit behavior
- LCR meters for measuring inductance, capacitance, and resistance
- Adjustable bench power supplies for controlled power-up checks
- BGA rework equipment for supported component packages
- Microscopes and precision tools for inspection and rework
- Experience with wire-cut EDM and laser marking equipment
REPAIR & REWORK
What Can We Repair?
COMMON PCB FAULTS
What Do We Check?
- Worn or damaged components
- Power supply faults
- Corrosion or electrolyte residue
- Damaged pads and traces
- Faulty ICs and power devices
- Signs of overheating or environmental damage
START WITH PHOTOS
Send Board Photos Before Shipping
Send clear photos of both sides of the board, its label, and any visible damage. This helps us review your request and advise on the next step.
REPAIR OPTIONS & TIMING
How We Review Your PCB
We review the damage, available replacement parts, and test options before confirming the next step.
Problems We Can Assess
- Power supply faults
- Failed or worn components
- Localized corrosion or electrolyte damage
- Damaged pads and traces
- Soldering defects or damaged connections
- Faults in power devices and control circuits
Before Sending Your Board
- Send clear photos of both sides and any visibly affected area
- Include the board label, part number, or device model
- Describe fault symptoms, error codes, or the rework required
- Wait for our next-step instructions before shipping
Typical Repair Time
7–10 Business Days After Receipt
Day 1 is the next business day after we receive and identify the board. Shipping, customs, holidays, approval delays, and parts delays are excluded. Complex repairs may take longer.
ILLUSTRATIVE EXAMPLES
PCB Repair Examples
Examples of component replacement, trace repair, and power-device rework.
Before
After
Power Supply Component Replacement
Cleaning and component replacement in a power supply circuit.
Before
After
Pad and Trace Repair
Restoring damaged pads and surface connections.
Before
After
Power Device Rework
Inspection and rework around power devices and connectors.
SELECTED REPAIR CASES
Recent PCB Repair Case Studies
See how different board faults are assessed, repaired, and verified.
Medical Equipment · Component Replacement · Power Circuit Repair
Defibrillator AC-DC Power Module Short-Circuit Repair
The power module would not start, produced no DC output, and operated the upstream protection. Diagnosis localized the short to the secondary rectifier stage before matching-rated devices were replaced.
View case study →
Laboratory Equipment · Medical Equipment · Power Circuit Repair · Trace and Pad Repair
Medical Ultrasonic Cleaner Input Filter Board Repair
The cleaner opened its fuse immediately at power-on. Inspection isolated a hard short on the AC input filter board, with a failed common-mode component, carbonized PCB material, and damaged connections.
View case study →
Medical Equipment · Power Circuit Repair
Mindray PM-8000 Patient Monitor Power Supply Repair
The monitor had standby power but did not respond to the power key. Diagnosis isolated a missing 12 V rail and a failed supply path to the PWM controller; documented board-level rework restored the rail and allowed the display to start.
View case study →BEFORE REQUESTING PCB REPAIR
Common Questions Before You Send a Board
Clear answers to the questions that most often affect the next step.
Can you assess a board without schematics?
Schematics are helpful, but we can assess some boards without them. Inspection, measurements, and comparison with a known-good board when one is available may help us investigate the fault. Send the board details first so we can review the request.
Should I ship my board before contacting you?
Please contact us first. After reviewing your photos, board details, and requirements, we will confirm whether to send the board and provide the applicable shipping instructions.
What should I include with my request?
Send photos of both sides, the board label or part number, the equipment model, and the symptoms or error codes. For rework, include the component locations, quantity, and work instructions if available.
How long does PCB repair take?
Typical repairs take 7–10 business days after receipt. Day 1 is the next business day after we receive and identify the board. Shipping, customs, holidays, approval delays, and parts delays are excluded.
Which PCB Repair Services Handle Different Board Types?
A capable board-level repair provider should identify the board category and revision, understand the fault symptom, explain the checks it can perform, and state the repair or replacement options before work is approved. PCB Reborn uses this board-by-board approach across industrial, medical-equipment, laptop, appliance, communications, and other electronic boards.
What Types of Circuit Board Damage Can Be Repaired at Board Level?
Potentially repairable issues can include failed components, damaged solder joints, connectors, pads, traces, and some corrosion or power-circuit faults. Whether repair is practical depends on the extent of damage, board construction, parts availability, ability to inspect or test the affected area, and the required return-to-service checks.
See how PCB repair evaluation works · Request a repair evaluation
TELL US ABOUT YOUR BOARD
Request a Repair Evaluation
Describe the fault or rework you need and attach clear board photos. We typically respond within 1 business day.
Please contact us before shipping a board.